Phillips 66 Sweeny Refinery Reports Process Upset
DAVENPORT, FL (DTN) – Phillips 66 reported a flaring due to a process upset involving two units at its 277,000 bpd Sweeny refinery in Texas, according to a filing submitted Monday (11/2) to the Texas Commission on Environmental Quality (TCEQ).
The incident began Sunday (11/1) at approximately 11:10 p.m. CT, affecting Unit 4, the fluid catalytic cracking (FCC) gas plant, and Unit 9, the crude processing unit. The filing did not specify when the event ended.
The FCC gas plant processes gases associated with catalytic cracking, including components used in gasoline blending and LPG production, while the crude unit separates crude oil into streams for downstream processing. Disruptions to either unit could affect refined-product output, although no production losses were confirmed.
The refinery reported estimated emissions of 14,696 pounds of sulfur dioxide across five flares, including 11,785 pounds from the coker flare and 2,894 pounds from Flare 19.
Other reported emissions included carbon monoxide, hydrogen sulfide, propane, butane and heavier hydrocarbons. The filing did not identify the cause of the upset or confirm whether operations had fully recovered.
The incident follows an October 16 process upset involving Unit 26.2 at the same refinery that resulted in flaring and estimated emissions of 16,129 pounds of sulfur dioxide.
DTN reached out to Phillips 66 for additional details but did not receive an immediate response.
(c) Copyright 2026 DTN, LLC. All rights reserved.