Flint Hills Corpus Christi West Reports Equipment Leak
DAVENPORT, FL (DTN) — Flint Hills Resources reported a leak involving a temporary pump in the Udex unit during planned maintenance at its 268,500 bpd Corpus Christi West refinery in Texas, according to a filing submitted Saturday (11/7) to the Texas Commission on Environmental Quality (TCEQ).
The Udex unit uses solvent extraction to separate aromatic hydrocarbons, including benzene, toluene and xylene, from refinery streams. The filing did not indicate whether the leak disrupted processing operations or affected gasoline blending components.
The refinery’s leak detection sensor network identified an anomaly Saturday at approximately 3 a.m. CT. Operators confirmed a leak at 3:31 a.m. and shut down and isolated the temporary pump five minutes later. The reported event period ended at 9:57 a.m., lasting six hours and 26 minutes.
The refinery reported estimated emissions of 200 pounds of benzene and 101 pounds of unspecified volatile organic compounds. Flint Hills said the released material was contained within the sewer system and wastewater treatment plant.
Fence-line air monitoring showed no detectable concentrations of benzene, volatile organic compounds, hydrogen sulfide, carbon monoxide or sulfur dioxide. The cause remains under investigation.
The incident follows a November 1 upset involving the refinery’s diesel hydrotreater that resulted in flaring and estimated emissions of 531 pounds of sulfur dioxide. An October 27 release also prompted the shutdown of the refinery’s DDS unit.
Flint Hills said the latest emissions estimates and event duration are preliminary and may be revised in its final report
(c) Copyright 2026 DTN, LLC. All rights reserved.